Basic
Press and hold the LED button to bring out of sleep mode. You will hear
a ‘Power On’ voice, and the LED button will turn on. The saber is now in
Wake mode. Watch this LED when controlling the saber, as listed in the
table below. Press the button once quickly, to turn the saber blade on.
When saber is ON:
Control | Effect | Description |
Press button once quickly | Blaster Deflect | |
Hold for 1 LED Flash (0.5 seconds) | Lock-up | Press button once to end lock-up |
Hold for 2 LED Flashes (1 second) | Infinite Color Change | Cycles all possible colors; press button once to select |
Hold for 3 LED Flashes (1.5 seconds) | Quick Color Change | Cycles major colors only; press button once to select |
Hold for 4 LED Flashes (2 Seconds) | Shuts off blade | Saber is still in Wake mode. |
When saber is OFF:
Control | Effect | Description |
Press button once quickly | Ignite Saber | |
Hold for 1 LED Flash (0.5 seconds) | Volume Adjust | Volume high, Volume low and Mute. |
Hold for 2 LED Flashes (1 second) | Light Effects | Stable, Unstable, and Pulse |
Hold for 3 LED Flashes (1.5 seconds) | Motion Control Toggle | Motion controls on or off. Does not affect font change on twist |
Hold for 4 LED Flashes (2 Seconds) | Flash On Clash Toggle | Turns on and off flash on impact. |
Hold for 5 LED Flashes (2.5 Seconds) | Font Change | Selects the next sound font on the board. |
Quick Twist | Font Change | Selects the next sound font on the board |
Hold for 10 Seconds | Sleep Mode | Also occurs after idle for 10 minutes |